10
To Attach and Remove the Presser Foot
To remove
Turn the handwheel toward you to raise the needle to its
highest position.
Raise the presser foot.
Press the lever on the back of the foot holder.
The presser foot will drop off.
To attach
Place the presser foot so the pin on the foot lies just under
the groove of the foot holder.
Lower the foot holder to lock the foot in place.
Presser Foot Lifter
The presser foot lifter raises and lowers your presser foot.
You can raise it about 0.6 cm (1/4") higher than the normal
up position for easy removal of the presser foot or to help
you to place heavy fabric under the foot.
Normal up position
Highest position
1
2
1
2
Janome 2212 Instruction Manual
2212 Owners Manual/ User Guide
To Next Page
Loading...
