32
Tricot Stitch
Pattern selector: D
Presser foot: Zigzag foot
Thread tension: 1–4
1
2
3
This stitch is used to finish the seam allowance on synthetics
and other fabrics that tend to pucker.
Place your fabric to allow a 1.6 cm (5/8") seam.
Trim the seam allowance after sewing.
Note:
Be careful not to cut the stitches.
It is also handy for darning and mending tears.
1
2
3
SECTION 4. UTILITY STITCHING
Overcasting
The zigzag stitch is used on the seam allowance to prevent
fabric from fraying at raw edges.
Pattern selector: C2, C3
Presser foot: Zigzag foot
Thread tension: 1–4
1
2
3
2
3
1
Janome 2206 Instruction Manual
2206 Owners Manual/ User Guide