Janome 3434D - Key Machine Setting Adjustments

www.toews.com
20
Adjustment of Stitch Length
To select stitch length, turn the dial.
The larger the number, the longer the stitch.
The stitch length can be adjusted from 1 to 4 mm.
Position “R” is for rolled and narrow hemmings.
Stitch length dial
Setting mark
Adjustment of Differential Feed Ratio
The differential feed ratio can be altered by turning
the dial.
The number on the dial indicates the ratio between
the main and the sub feed motion.
1.0 indicates the neutral position.
Differential feed dial
Setting mark
How to adjust
•
If the sewn fabric is stretched, turn the dial
counterclockwise (toward 2.2).
•
If the sewn fabric is gathered, turn the dial
clockwise (toward 0.5).
Stretched
Gathered
1
2
1
2
1
2
1
2
1
2
1
2
Janome 3434D Instruction Manual
Janome Serger 3434D
www.toews.com
3434D Owners Manual/ User Guide