Janome 521 - Page 16

14
The forward feeding (A) and backward feeding (B) should be equal when sewing stretch
stitch pattern.
<To adjust>
Select the straight stretch stitch ( ).
Place a piece of paper under the foot. Turn the handwheel to check the needle marks.
Remove the cap to access the adjusting screw.
If the forward feeding (A) is longer than backward feeding (B), turn the adjusting screw in the
direction (C).
If the forward feeding (A) is shorter than backward feeding (B), turn the adjusting screw in the
direction (D).
Attach the cap.
Adjusting Feed Balance
A
A
B
1
2
3
A
A
1
2
3
B
A
A
1
2
3B
A
B
A
B
A
B
(D)
(C)
Adjusting screw