4
Service Access (4)
• Rear cover
<To remove>
Remove the face plate, base cover and front cover (see pages 1-3).
Remove the setscrews (A), (B), (C) and (D).
Lower the presser foot lifter and pull away the rear cover from the machine, clearing the parts (1),
(2) and (3), in this order.
<To attach>
Follow the above procedure in reverse.
Front cover
Setscrew (C)
Setscrew (B)
Setscrew (D)
Setscrew(A)
Setscrew (B)
Presser foot lifter
(1)
(2)
(3)
To Next Page
Loading...
