Why does my Janome Sewing Machine skip stitches?
Skipped stitches can occur if: * The needle is incorrectly inserted. * The needle is bent or blunt. * The needle and/or threads are not suitable for the work being sewn. * A blue needle is not being used for sewing stretch, very fine fabrics or synthetics; in this case, change the needle. * The needle thread is not threaded properly. * The wrong needle is being used.
Why does the bobbin thread break on my Janome Sewing Machine?
The bobbin thread may break if: * The bobbin thread is not threaded properly in the bobbin case and shuttle; in this case, change the bobbin. * Lint has collected in the shuttle area. * The bobbin is damaged and doesn't turn smoothly.
Why is my Janome 639X so noisy?
Your machine might be noisy because: * There is thread caught in the hook race. * Lint has built up in the shuttle or the shuttle race.
What to do if my Janome 639X Sewing Machine fabric is not fed?
The fabric may not feed if the feed dog is packed with lint.
What to do if my Janome 639X Sewing Machine does not run?
The machine may not run if: * The machine is not plugged in. * A thread is caught in the shuttle race. * The push-clutch is disengaged.
Why does the needle thread keep breaking on my Janome 639X?
The needle thread may break for several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle thread and the bobbin thread are not set properly under the presser foot at the beginning of sewing. * The threads are not drawn to the rear after finishing sewing. * The thread is too heavy, or too fine for the needle.
What causes seam puckering on my Janome 639X?
Seam puckering can be caused by: * The needle thread tension being too tight. * The needle thread not being threaded properly. * The needle being too heavy for the fabric being sewn.
General| Type | Mechanical |
|---|---|
| Adjustable Stitch Length | Yes |
| Adjustable Stitch Width | Yes |
| Free Arm | Yes |
| Stitch Options | Stretch |
| Buttonhole Styles | 1 |
| Presser Feet | Zipper Foot |
Instructions on how to connect the sewing machine to the power source.
Procedure for safely removing and inserting a sewing machine needle.
Instructions for preparing and winding a bobbin with thread.
Detailed steps for winding thread onto the bobbin correctly.
Instructions on how to correctly insert the wound bobbin into the machine.
Step-by-step guide on how to thread the sewing machine.
Guidance on adjusting needle thread tension for optimal stitch quality.
Step-by-step guide for sewing a buttonhole using the machine.
Troubleshooting steps for when the needle thread repeatedly breaks.
Troubleshooting steps for when the bobbin thread repeatedly breaks.
To Next Page