Janome 639X - Changing Presser Foot

www.toews.com
6
Extension Table
• Detaching the table
Pull the table away from the machine, as
illustrated, for “free-arm” sewing of cuffs and
sleeves. The extension table can be used as
accessory box.
•Attaching the table
Push the extension table until it snaps into the
machine.
1 Extension table
2 Tab
3 Hole
Changing Presser Foot
Lever
Groove
Pin
•To remove
Turn the handwheel toward you to raise the
needle to its highest position. Raise the presser
foot. Press the lever on the back of the foot
holder. The presser foot will drop.
•To attach
Place the presser foot so that the pin on the
foot lines up directly below the groove of the
foot holder. Lower the foot holder to lock the
foot in place.
1
2
3
2
1
1
3
Stitch Selector
Setting mark
Stitch selector
Raise the needle above the fabric.
Turn the dial to select the desired pattern.
NOTE:
To avoid needle or fabric damage, make sure
the needle is up and out of the fabric while
selecting a stitch.
2
1
3
2
1
1
2
Janome 639X Instruction Manual
www.toews.com
639X Owners Manual/ User Guide