Janome 639X - Blind Hem Stitch; SECTION 4. DECORATIVE STITCHES Shell Tuck

www.toews.com
26
Blind Hem Stitch
Stitch selector: 8 or 9
Needle thread tension: 1 to 4
Presser foot: Zigzag foot
On heavyweight fabrics that ravel, the raw edge
should be overcast first. Then fold the hem, as
illustrated, leaving
1/4”(0.7 cm) of the hem edge showing.
Position the fabric so the needle at its leftmost
position just pierces the edge of the fold.
After hemming is completed, press together both
sides of the finished hem. The top side of the
fabric should show only the blind stitches.
1
2
3
1
2
3
Use a light weight fabric such as tricot.
Fold and stitch on bias.
Place the folded edge along the slot of foot.
The needle should fall off the edge of the fabric on the
right forming a tuck.
Shell Tuck
Stitch selector: 10
Needle thread tension: 6 to 8
Presser foot: Zigzag foot
3
2
1
1
3
2
SECTION 4. DECORATIVE STITCHES
Janome 639X Instruction Manual
www.toews.com
639X Owners Manual/ User Guide