20
u Set the pattern selector dial
at “ ”.
Sew 5 stitches of bartack,
and raise the needle from
the fabric.
Then set the pattern
selector dial at “ ” and
sew a few stitches to
secure the seam.
i Remove the fabric from the
machine, and cut the
sewing threads.
Pierce a pin inside the
bartack. Then cut the
opening with a seam ripper.
Be careful not to cut the
stitches.
u
i
Machine Setting
Stitch Length
0.5 ~ 2
A: Zigzag Foot
The tricot stitch is used to finish
seam allowance on synthetics
and other fabrics that tend to
pucker.
The stitch is excellent for
darning and mending tears in
fabric as well.
•
Tricot Stitch
To Next Page
Loading...
