Janome 712T - SECTION IV CARE OF YOUR MACHINE; Cleaning the Bobbin Holder

25
q
w
er e
w
q
SECTION IV CARE OF YOUR MACHINE
Setscrew
q Remove the needle and
presser foot. Remove the
setscrew on the left hand
side of the needle plate
with the screwdriver.
Remove the needle plate.
w Take out the bobbin.
e Lift up the front end of
bobbin holder to remove it.
q While pushing the front end
of slide plate, slide it toward
you as far as it will go.
w Take out the bobbin, and
remove lint with a lint
brush.
e Insert the bobbin.
r Close the slide plate.
* Before cleaning, turn the
handwheel toward you to
raise the needle.
•
Cleaning the Bobbin
Holder
•
Cleaning the Hook Race
and Feed Dog