4
For Your Safety
1. While in operation, always keep your eyes on the needle,
and do not touch any moving parts such as the take-up lever,
handwheel or needle.
2. Do not run the machine:
* When making any adjustment in the needle area, such as
threading needle, changing needle, or threading bobbin,
etc.
*When attaching or removing parts.
* When cleaning the machine.
Before Using the Machine
•
Wipe the machine with a clean cloth to remove any dust or oil.
•
To replace presser foot and needle, follow the guides in the
instruction book.
•
When setting up the machine for sewing, test the stitches on a
small piece of the fabric with the threads that will be used for
actual sewing.
For Longer Life of the Machine
•
Do not expose the machine to direct sunlight for long periods
of time.
•
Do not store the machine in an area of high humidity.
•
Handle the machine with care to avoid dropping or bumping.
Setscrews
•
How to Install the Spool Pin
•
Fundamentals of Operation
Spool pin and two setscrews are packed separately to prevent
damage in transit.
After unpacking, attach the spool pin holder with a screwdriver,
as shown in illustration.
To Next Page
Loading...
