Janome 7330 - Service Access (2) Base, Bed Cover

5
7330
SERVICE ACCESS (2)
BASE
TO REMOVE:
1. Remove the 4 setscrew (A) and the 2 setscrew (B), remove the base.
TO INSTALL:
2. Place the part C (concave part in the illustration) between the base and the arm leg.
Install the base with the 4 setscrews (A) and the 2 setscrews.
BED COVER
TO REMOVE:
1. Set the drop lever to the left and remove the 2 setscrews (C), remove the bed cover.
TO INSTALL:
2. Set the drop lever to the left and install the bed cover.
Secure it in place with the 2 setscrews (C).
Setscrew (A)
Setscrew (B)
Setscrew (C)
Drop lever
Bed cover
Base
C part