Why is the fabric not feeding smoothly on my Janome 9102D Sewing Machine?
If the fabric is not feeding smoothly through your Janome Sewing Machine, there might be a few reasons: * The feed dog could be packed with lint. * The presser foot might be raised. * The pressure of the foot could be too weak. To solve these issues, lower the presser foot.
Why does the needle keep breaking on my Janome 9102D?
There are several reasons why the needle might break on your Janome Sewing Machine: * The needle may be incorrectly inserted. * The needle could be bent or blunt. To prevent breakage, avoid forcefully pulling the fabric; instead, pull it lightly.
General| Type | Overlock |
|---|---|
| Number of threads | 3/4 |
| Stitch length | 1mm to 4mm |
| Needle Threader | No |
| Free Arm | No |
| Warranty | 25-year limited warranty |
| Differential feed ratio | 0.5 to 2.25 |
| Stitch Options | rolled hem |
| Presser Feet | Standard overlock foot |
| Included Accessories | Needles, screwdriver, lint brush |
To Next Page
