Janome 9102D - Threading the Needle on the Right

40
• Threading the Needle on the Right
Place the spool of thread on the spool pin second from
the left.
*
The points to thread for needle on the right are
marked in blue.
*
A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the left from back to front: (A)
1 Thread guide
2. Pass the thread through the holes in the second
row from the left of the thread guide plate as
illustrated.
2
Thread guide plate
1
2
1
2
*
If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
5
6
2
(A) (B)
1
3
4
7
8
9
10
124 3