Janome DC4030P - REPLACING MACHINE SOCKET

27
DC4030P
REPLACING MACHINE SOCKET (UNIT)
REPLACING THE MACHINE SOCKET
TO REMOVE:
1. Remove the front cover and rear cover (see pages 4 and 5).
2. Remove the 2 setscrews and remove the machine socket.
TO INSTALL:
3. To install the machine socket, follow the above procedure in reverse.
NOTE
Pull out the cord in front of the arm to prevent it from contacting with the lower shaft or other moving
parts, and secure it to the feed motor cord with a binder.
Setscrew
Setscrew
Machine socket (unit)