Janome DE 5024 - What to Do When; Skipping Stitches; Fabric Not Moving

1
WHAT TO DO WHEN
CONDITION CAUSE HOW TO FIX REFERENCE
1. SKIPPING 1. NEEDLE IS NOT INSERTED INSERT THE NEEDLE PROPERLY.
STITCHES PROPERLY.
2. NEEDLE IS BENT OR WORN. CHANGE THE NEEDLE.
3. INCORRECTLY THREADED. RETHREAD.
4. NEEDLE OR THREAD ARE USE THE RECOMMENDED
INAPPROPRIATE FOR SEWING NEEDLE AND THREAD.
FABRIC BEING SEWN.
5. SEWING ON STRETCH USE A SIZE 11 BLUE TIP NEEDLE.
FABRIC.
6. INAPPROPRIATE NEEDLE SEE MECHANICAL P.17
BAR HEIGHT. ADJUSTMENT
"NEEDLE BAR HEIGHT".
7. INAPPROPRIATE NEEDLE SEE MECHANICAL P.18
TO HOOK TIMING. ADJUSTMENT "NEEDLE
TO ROTARY HOOK TIMING".
8. INAPPROPRIATE NEEDLE SEE MECHANICAL P.15
TO HOOK CLEARANCE. ADJUSTMENT "NEEDLE
CLEARANCE TO ROTARY
HOOK".
2. FABRIC NOT 1. INCORRECT FEED DOG SEE MECHANICAL P.19
MOVING HEIGHT. ADJUSTMENT "FEED DOG
HEIGHT".
2. THREAD ON BOTTOM SIDE MAKE SURE TO BRING
OF FABRIC IS JAMMED UP. BOTH NEEDLE AND BOBBIN
THREAD UNDER THE FOOT
WHEN STARTING SEWING.
3. FEED DOG TEETH ARE CHANGE THE FEED DOG.
WORN.