www.janome.com
Join us!
Memory Craft 15000
Horizon Memory Craft 15000
d. Touch Quilting.
• Touch Straight Stitch. Touch the dual feed button. The machine will indicate to use the AcuFeed Flex Dual
Feed foot. Attach foot AD and dual feed holder. Make a quilt sandwich and sew several rows of quilting.
• Touch the dual feed button to disengage.
• Touch the Go Back Arrow.
• Touch Free Quilting, select Straight Stitch 2. Attach foot QO and try some free motion quilting. Note that One
Stitch Stop is always on to allow you to bring up the bobbin thread at the beginning of the quilting.
And the presser foot height can be changed to adjust for the depth of the quilt sandwich.
5. Ordinary Sewing Modes.
a. Touch Home button.
b. Touch the Buttonhole tab.
• Attach Buttonhole foot R. Place a button in the back of the foot, pull down the buttonhole lever. Fold a piece of
cotton in half with stabilizer and make a buttonhole.
c. Touch Home, select Decorative mode .
• Select Play.
• Touch the Combine button; select stitch 4.
• Touch the Horizontal Flip button; select Stitch 4. Grey highlighted stitches on stitch chart can be flipped horizontal.
• Attach Satin Stitch foot A and sew the stitch combination on a square of stabilized fabric.
• Touch the Save In tab. The stitch combination can be saved in the machine or to a USB stick. Touch the Ordf
file; touch the pencil icon to name the pattern. Spell “shoes”; touch OK to save the name, touch OK to save the design.
To Next Page
Loading...
