Janome Horizon Memory Craft 15000 - Embroidery Mode Setup; Embroidery Session Requirements; Initial Embroidery Setup

www.janome.com
Join us!
Memory Craft 15000
Horizon Memory Craft 15000
PAGE 8
• Click Write a Design.
• Select built in from the pop up window. Click the red arrow to send the design to the machine.
• On the machine, touch Home. Select Decorative mode, select Created Stitches, select the bow.
• Sew the stitch pattern on a piece of stabilized cotton.
Embroidery Mode
1. Getting Ready to Embroider
a. Attach Embroidery Unit and turn on machine
Embroidery Session:
• MC15000
• Embroidery Unit
• Power Cord
• All the hoops that were packed with the machine
• Laptop with Horizon Link Installed
• USB cable or USB flash drive
• Instruction Manual
Fabric:
• Several pieces of fabric in sizes to fit the SQ14 hoop
• Tear away stabilizer to fit hoop
• Janome Prewound bobbins
• Embroidery Thread