EasyManuals Logo

Janome JemPlatinum 760 JP760 User Manual

Janome JemPlatinum 760 JP760
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
39
Cross Stitch
Machine setting
q Stitch pattern: #47 – #50
w Presser foot: Satin stitch F
e Thread tension: 3 – 6
Fagoting
Machine setting
q Stitch pattern: #44
w Presser foot: Zigzag foot A
e Thread tension: 3 – 6
Use this stitch to join two pieces of fabric to create an
open work appearance, and add design interest.
Fold under each fabric edge 1/2" (1.3 cm) and press.
Pin the two edges to a piece of paper or tear-away
backing 1/8" (0.3 cm) apart.
q Paper
Sew slowly, guiding the fabric so the needle catches
the folded edge on each side.
Tear away the backing after sewing is finished.
You can make cross stitch designs with these
patterns, in half the time it would take if
embroidered by hand.
* If you press the auto lock button before sewing,
the machine will sew one unit of the cross stitch
and stop automatically.
q
w
e
q
q
w
e

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Janome JemPlatinum 760 JP760 and is the answer not in the manual?

Janome JemPlatinum 760 JP760 Specifications

General IconGeneral
BrandJanome
ModelJemPlatinum 760 JP760
CategorySewing Machine
LanguageEnglish

Related product manuals