17
BUTTONHOLE FEED BALANCE
Correct setting
When sewing buttonhole, the stitches on each side of buttonhole should be the same stitch
density.
The range of 9 -11 stitches in the right side row (backward feeding) against 10 stitches in
the left side row (forward feeding) is considered acceptable.
To adjust
1. Check the stitches by sewing buttonholes, and remove the cap.
2. Turn the adjusting screw in the direction of “C” in case of a (right stitches are coarse), or
in the direction of “D” in case of B (left stitches are coarse).
3. Attach the cap.
To Next Page
Loading...
