Janome MC 11000 - Manual

47
MC 11000
Replacing LCD Unit (1)
To remove:
1 Remove the front cover.
2 Remove the printed circuit board A.
3 Remove the 4 screws (A) and remove the LCD guide
shaft unit.
4 Loosen the screw (B) with the 5.5 mm wrench and
remove the Stopper plate.
5 Loosen the 2 screws (C).
6 Remove the LCD unit.
(Fig. 1)
LCD unit
Flexible cord unit
(Fig. 1)
(A)
(A)
(A)
(C)
(C)
(B)
LCD guide shaft unit
Stopper plate