Janome MC7700 QCP - Circuit Board A Replacement; Circuit Board A Replacement Procedure

20
CIRCUIT BOARD “A” REPLACEMENT
[TO REMOVE]
1. REMOVE THE FRONT COVER
(SEE PAGE 5).
2. REMOVE THE CONNECTORS (5 PCS) FROM
THE CIRCUIT BOARD A.
REMOVE THE SETSCREWS (3 PCS).
REMOVE THE CIRCUIT BOARD A.
[TO ATTACH]
3. REVERSE THE ABOVE PROCEDURE.
SETSCREW
SETSCREW
SETSCREW
CONNECTORS
CIRCUIT
BOARD A
MECHANICAL ADJUSTMENT