Janome MC7700 QCP - Free-Arm Cover Service Access

4
FREE-ARM COVER
[TO REMOVE]
1. REMOVE THE MACHINE BASE AND BED COVER
(SEE PAGE 3).
REMOVE THE NEEDLE PLATE.
2. REMOVE THE SETSCREW (A) AND PIN.
UNLOCK THE HOOK (A) AND (B) FROM THE
INSIDE.
REMOVE THE TAB (A) AND (B) FROM THE HOLES.
SLIDE THE FREE-ARM COVER TO THE LEFT TO
REMOVE THE FREE-ARM COVER.
[TO ATTACH]
3. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
THE HOOK (B) SHOULD HOLD THE THREAD
CUTTER PLATE.
FREE-ARM COVER
TAB (B)
TAB (A)
PIN
NEEDLE PLATE
SETSCREW (A)
HOOK (B)
HOOK (A)
THREAD
CUTTER
PLATE
SERVICE ACCESS (4)