Janome MC9900 - Preparation; Removing Y-Carriage Cover (Upper)

2
MC 9900
z Push down the carriage arm release lever q.
Extend the carriage arm. Swing out the carriage arm
until it locks in fully extended position.
q
x Remove the setscrew w.
c Slide the carriage in the direction of the arrow.
Remove the setscrew e.
v Remove the Y-carriage cover (upper).
e
Preparation
Remove Y-carriage cover (upper), X-carriage cover
and Embroidery unit cover before replacing to access
carriage parts.
•Removing Y-carriage cover (upper)
w