33
Zipper Sewing
Machine Setting
Pattern: 01 (Mode 1)
Thread tension:2-6
Presser foot: Zipper foot E
Foot pressure: 3
To attach the zipper foot E
Fit the pin on zipper foot E to the groove on the foot holder.
1 Groove
2 Pin
3To sew the left side of the zipper, attach zipper
foot E with the pin on the right-hand side.
4To sew the right side of the zipper, attach
zipper foot E with the pin on the left-hand side.
Fabric preparation
1 Add 1 cm (3/8“) to the zipper size. This is the overall
opening size.
1 Right Sides of the Fabric
21 cm (3/8“)
3Opening Size
4 Zipper Size
5Slider
6 Zipper Teeth
7Zipper Tape
8Wrong Side of the Fabric
9 End of the Zipper Opening
2Place the right sides of the fabric together and sew
to the end of the opening with a 2 cm (13/16“) seam
allowance.
Reverse Stitch to lock the seams.
Manually increase the stitch length to 5.0 and baste
the zipper opening with the thread tension loosened.
10 2 cm (13/16“) Seam Allowance
11 Basting
12 Reverse Stitches
13 Seam Stitches
1
2
1
2
3
4
5
8
6
7
11
9
10
12
9
13
1
2
3
4
To Next Page
Loading...
