Why does the needle thread break on my Janome Sewing Machine?
The needle thread may break due to several reasons. Ensure the needle thread is correctly threaded. Replace the needle. The thread may be tangled around the spool; if so, use the spool holder. If you are stitching free motion quilting, avoid moving the fabric too fast.
What to do if the needle breaks on my Janome Memory Craft 6700P Sewing Machine?
The needle may break because it is incorrectly inserted. You may need to change the needle. The needle may be too fine for the fabric being used; if so, use the correct foot.
How to fix skipped stitches on a Janome Sewing Machine?
Skipped stitches can occur if the needle is incorrectly inserted, bent, or blunt. Try using the stretch stitch needle or changing the needle. Also, the needle and/or threads may not be suitable for the work being sewn, so be sure to use the correct needle for the fabric.
Why does the bobbin thread keep breaking on my Janome Sewing Machine?
The bobbin thread may break if it is not threaded properly in the bobbin holder. Try changing the bobbin.
Why is my Janome Memory Craft 6700P Sewing Machine so noisy?
The machine may be noisy because thread has been caught in the hook race.
How to prevent seam puckering with my Janome Memory Craft 6700P?
Seam puckering can occur if the needle thread tension is too tight. In this case, make stitch shorter. The stitch length may also be too long for the fabric, so shorten the stitch length. If sewing very fine fabrics, apply a stabilizer.
Why is the fabric not feeding smoothly through my Janome Memory Craft 6700P?
The fabric may not feed smoothly if the feed dog is packed with lint. Try making the stitch longer.
What to do if my Janome Sewing Machine does not run?
The Janome Sewing Machine may not run if it is not plugged in.
What to do if buttonhole sewing is not sewn properly on my Janome Memory Craft 6700P?
If buttonhole sewing is not sewn properly, the stitch density may not be suitable for the fabric being sewn. Apply an interfacing.
Why am I getting loops on the seams with my Janome Memory Craft 6700P?
Loops on the seams can occur if the needle thread tension is too loose.
General| Built-in Stitches | 200 |
|---|---|
| Needle Positions | 91 |
| Maximum Stitch Width | 9 mm |
| Maximum Stitch Length | 5 mm |
| LCD Screen | Yes |
| Dual Feed System | Yes |
| Free Arm | Yes |
| Foot Pressure | Adjustable |
| Knee Lifter | Yes |
| Start/Stop Button | Yes |
| Needle Up/Down | Yes |
| Type | Computerized |
| Built-in Memory | Yes |
| USB Port | Yes |
| Maximum Sewing Speed | 1200 stitches per minute |
| Buttonholes | 9 one-step buttonholes |
| Lighting | LED |
| Bobbin Type | Horizontal Rotary |
Instructions to prevent electric shock risks.
Warnings to prevent burns, fire, injury, and misuse.
Steps for connecting power, threading, and bobbin setup.
Using controls, modes, tension, and presser foot adjustments.
Performing basic straight stitches, including edge sewing and corners.
Using the dual feed device for difficult materials.
Achieving professional results with the HP foot.
Step-by-step guide for installing zippers.
Overview of sensor, automatic, keyhole, and specialty buttonholes.
Techniques for free motion quilting with convertible feet.
To Next Page