Janome Memory Craft 6700P - Quilting; Stippling

76
q
w
Attaching the quilting guide bar
The quilting guide bar is helpful when sewing parallel,
evenly spaced rows of stitching.
Insert the quilting guide bar into the opening and slide the
quilting guide bar to the position according to the desired
space between seams.
q Opening on the foot holder
w Quilting guide bar
e Space between seams
e
Sewing
Sew while tracing the previous seam with the quilting
guide bar.
Quilting guide bar for dual feed foot
Insert the quilting guide bar into the hole in the rear of the
foot holder.
Shift the quilting guide bar to the desired spacing.
r Quilting guide bar
t Hole
w
e r
q
t
r
t
Quilting
q Pattern: MODE 1: 1 or MODE 2: 001
w Presser foot: Zigzag foot A or
Dual feed foot AD
e Thread tension: 2-6
r Foot pressure: 3
t Quilter
Stippling
q Pattern: MODE 2: 093
w Presser foot: Satin stitch foot F or
Open-toe satin stitch foot F2
e Thread tension: 3-6
r Foot pressure: 2-3
The following stitch patterns can also be used for
stippling.
A pre-programmed stippling stitch is a fast and easy
method to quilt small areas.
Place a quilt layer and sew.
w
e r
q
MODE 2