Janome Memory Craft 6700P - Storing and Recalling Pattern Combinations; Storing a Pattern Combination

94
Programming a Monogram
Example:
To program “
R&B
”
z Press the mode key to enter mode 3
.
Press the stitch display key.
q
Mode key
w
Stitch display key
x
Turn the stitch length adjusting dial to select the letter
“
R
”. Press the memory key.
e
Memory key
c
Press the memory key again.
The letter “
R
” has been registered.
v Press the stitch display key.
Turn the stitch width adjusting dial and stitch length
adjusting dial to select the letter “&”.
Press the memory key.
b The letter “&” has been registered.
Turn the stitch width adjusting dial and stitch length
adjusting dial to select the letter “B”.
Press the memory key.
n The letter “B” has been registered.
Start sewing.
The machine will sew “R&B” and stop automatically.
NOTE:
Turn the auto thread cutter function on (refer to page
34, “Auto thread cutting” section.) to cut the thread
automatically after the sewing.
z
v
x
c
b
n
w
q
e
e
e
e
w