95
Reducing the size of letters
To reduce the height of character to approximately 2/3 of
its original size, select the character with the arrow key
and turn the stitch width adjusting dial counterclockwise.
The stitch width (the height of character) is set at “6.0” w.
q Arrow key
NOTE:
The size of 9 mm monogram cannot be reduced.
A
2/3
A
Spacing
To enter the space in monogramming, select one of
the three space icons on the lower right corner of the
monogram selection window.
q Space icons
w Small-size space
e Medium-size space
r Large-size space
q
w e r
Monogram size
When the stitch width is set at “9.0” q, the actual sewing
result of monogramming size will be slightly smaller than
9 mm.
To sew monogramming of full 9 mm height (uppercase
alphabet only), select 9 mm monogram from the font
style w (refer to page 93).
A a j y
Ё
1 2
9.0 mm
q
q
w
w
To Next Page
Loading...
