Janome Memory Craft 6700P - Zipper and Hem Sewing; Zipper Sewing Procedure

43
Lock-a-matic Stitch
q Pattern: MODE 1: 2 or MODE 2: 002
w Presser foot: Zigzag foot A
e Thread tension: 2-6
r Foot pressure: 3
Use this stitch to secure the beginning and the end of a
seam with backstitching.
When you reach the end of the seam, press the reverse
key q once.
The machine will sew four reverse stitches, four forward
stitches, and then stop sewing automatically.
Variety of Straight Stitches
Straight Stitch in Center Needle Position
q Pattern: MODE 1: 1 or MODE 2: 001
w Presser foot: Zigzag foot A
e Thread tension: 2-6
r Foot pressure: 3
w
e r
q
This unique stitch is used where an invisible locking
stitch is needed.
The machine will sew several locking stitches at the
beginning and continue sewing forward.
When you press the reverse key q at the end of the
seam, the machine will sew several locking stitches in
place, then stop sewing automatically.
Use this stitch for seaming, rolled hemming etc.
Locking Stitch
q Pattern: MODE 1: 3 or MODE 2: 003
w Presser foot: Zigzag foot A
e Thread tension: 2-6
r Foot pressure: 3
w
e r
q
w
e r
q
q
q