Janome Memory Craft 6700P - Mirror Image

86
Mirror Image
Example:
Pattern 184 in mode 2 and its mirror image
z Select pattern 184 in mode 2.
x Press the mirror image key to ip the pattern on a
vertical line. The vertical mirror sign is displayed.
q Mirror image key
w Vertical mirror sign
c Press the mirror image key again to ip the pattern on
a horizontal line.
The horizontal mirror sign is displayed.
The stitch pattern will be back to normal if the pattern
cannot be ipped horizontally.
e Horizontal mirror sign
v Press the mirror image key again to ip the pattern
vertically and horizontally.
The mirror image (vertical and horizontal) sign is
displayed.
r Mirror image sign (Vertical and horizontal)
b Press the mirror image key again to back to the
original orientation.
z
x
c
v
b
q
w
e
r
NOTE:
Horizontal mirror image is available only for the
specic patterns. For pattern identication, these
patterns are shaded in light grey on the reference
chart.
Mirror image function will be canceled and mirror
image icon will disappear if the selected pattern is not
suitable for the mirror image.