Janome Memory Craft 6700P - Keyhole Buttonholes Q W; Keyhole Buttonholes; Knit Buttonhole; Round End and Fine Fabric Buttonholes

65
The sewing procedure is the same as that of 023 square
(sensor) buttonhole (refer to pages 58-60).
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.20 to 1.00.
w
e r
q
Round End and Fine Fabric Buttonholes
q Pattern: MODE 2: 025
MODE 2: 026
w Presser foot: Automatic buttonhole foot R
e Thread tension: 1-5
r Foot pressure: 3
Keyhole Buttonholes
q Pattern: MODE 2: 027-029
w Presser foot: Automatic buttonhole foot R
e Thread tension: 1-5
r Foot pressure: 3
w
e r
q
The sewing procedure is the same as 023 square (sensor)
buttonhole (refer to pages 58-60).
Use an eyelet punch to open the keyhole buttonhole.
NOTE:
The buttonhole width can be adjusted from 5.6 to 9.0.
The stitch density can be adjusted from 0.20 to 1.00.
The sewing procedure is the same as that of 023 square
(sensor) buttonhole (refer to pages 58-60).
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.50 to 1.00.
w
e r
q
Stretch Buttonhole
q Pattern: MODE 2: 030
w Presser foot: Automatic buttonhole foot R
e Thread tension: 1-5
r Foot pressure: 3
w
e r
q
The sewing procedure is the same as that of 023 square
(sensor) buttonhole (refer to pages 58-60).
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.70 to 1.20.
Knit Buttonhole
q Pattern: MODE 2: 031
w Presser foot: Automatic buttonhole foot R
e Thread tension: 1-5
r Foot pressure: 3