93
• Selecting a font style
Turn the stitch width adjusting dial and move the cursor
out of the character style selection to change the font
style. The tab of selected font style will be inverted as
shown in !6.
The following 3 styles are available.
!5 Block
!6 Script
!7 9 mm monogram
!8 Font style selection (tabs)
!5 !6 !7
NOTE:
Cyrillic letters and Japanese letters are available
when selecting Russian or Japanese language
(refer to page 35, “Language selection). The extra
font style tab appears when those language are
selected.
• Selecting a letter (character)
z Turn the stitch length adjusting dial clockwise or
counterclockwise to move the cursor for selecting
letter.
!9
x After selecting the desired letter with the cursor, press
the memory key.
!9 Cursor (letter selection)
@0 Memory key
c The selected letter will be displayed as shown.
Cyrillic Japanese
!8
z x
c
@0
To Next Page
Loading...
