Janome Memory Craft 6700P - Selecting the Pattern; Mode 1: Direct Pattern Selection Mode

30
Selecting the Pattern
Mode 1: Direct pattern selection mode
You can select the stitch patterns on the direct pattern
reference window by pressing the corresponding numeral
keys.
q Direct pattern reference window
w Numeral keys
w
q
Direct pattern reference window
Press the stitch display key to hide the direct pattern
reference window. The stitch width and length values are
displayed to the right side of the LCD screen.
Press the stitch display key again to show the direct
pattern reference window.
e Stitch display key
r Stitch width (or needle drop position)
t Stitch length
r
t
e