Janome Memory Craft 6700P - Using Arrow Keys; Customizing Machine Settings

33
v Press the right arrow key to enter the desired setting.
Turn the either of the jog dials to move the cursor and
select the desired setting.
Press the memory key to set the change.
u Right arrow key
i Memory key
• Using arrow keys
You can use arrow keys to select your desired patterns in
mode 2 or 3.
Press the mode key to select the mode 2 or 3.
To select the desired stitch pattern, press the arrow keys
until the desired pattern is displayed.
q Arrow keys
Customizing Machine Settings
You can customize the machine settings to your
preference.
Example: Changing the foot control start-up speed
z Press the set key and the LCD screen will show the
machine setting mode.
q Machine setting mode
w Set key
r
e
y
t
q
x To turn the page, turn the stitch width adjusting dial.
The page number will be indicated upper left corner of
the LCD screen.
e Stitch width adjusting dial
r Page number
c To move the cursor (the bold rectangle on the cell) up
or down, turn the stitch length adjusting dial.
t Cursor
y Stitch length adjusting dial
z
c
v
x
b
w
q
b To continue machine settings, return to procedure x
and select the other settings.
To nish and apply the settings, press the memory
key i. The machine setting mode will be closed and
the change of the settings will apply.
To cancel the machine setting mode, press the clear
key o. The machine setting mode will be closed and
changes of machine settings will not apply.
o Clear key
u
i
i
o