To Next Page
D
David SawyerSep 13, 2025
Why is the auto thread cutting failing on my Janome Sewing Machine?
Why is the auto thread cutting failing on my Janome Sewing Machine?
General| Built-in Stitches | 200 |
|---|---|
| Needle Positions | 91 |
| Maximum Stitch Width | 9 mm |
| Maximum Stitch Length | 5 mm |
| LCD Screen | Yes |
| Dual Feed System | Yes |
| Free Arm | Yes |
| Foot Pressure | Adjustable |
| Knee Lifter | Yes |
| Start/Stop Button | Yes |
| Needle Up/Down | Yes |
| Type | Computerized |
| Built-in Memory | Yes |
| USB Port | Yes |
| Maximum Sewing Speed | 1200 stitches per minute |
| Buttonholes | 9 one-step buttonholes |
| Lighting | LED |
| Bobbin Type | Horizontal Rotary |
Instructions to prevent electric shock risks.
Warnings to prevent burns, fire, injury, and misuse.
Steps for connecting power, threading, and bobbin setup.
Using controls, modes, tension, and presser foot adjustments.
Performing basic straight stitches, including edge sewing and corners.
Using the dual feed device for difficult materials.
Achieving professional results with the HP foot.
Step-by-step guide for installing zippers.
Overview of sensor, automatic, keyhole, and specialty buttonholes.
Techniques for free motion quilting with convertible feet.
