Janome Memory Craft 6500 - Drawing Up the Bobbin Thread; Bringing Bobbin Thread to Surface

18
Drawing Up the Bobbin Thread
1Raise the Presser Foot Lifter.
Hold the needle thread with your finger and press
the up/down needle button twice to pick up the
bobbin thread.
1 Needle Thread
2 Needle Up/Down Button
2 Draw up the needle thread to bring up a loop of
the bobbin thread.
3 Bobbin Thread
3 Slide 10 cm (4") of both threads to the back under
the presser foot.
1
2
1
3
3
1
1
3
2