Why is my Janome MEMORY CRAFT 9500 noisy?
If your Janome Sewing Machine is making unusual noises, it could be due to: * Threads caught in the hook mechanism. * The feed dog being packed with lint.
Why does the bobbin thread break on my Janome MEMORY CRAFT 9500?
The bobbin thread might break because: * It is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and doesn’t turn smoothly; in this case, replace the bobbin.
Why does the needle thread break on my Janome MEMORY CRAFT 9500 Sewing Machine?
The needle thread may be breaking due to several reasons: * The needle thread might not be threaded properly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be inserted incorrectly. * The thread could be too heavy for the needle. * The needle thread may not have set in the thread holder when you started embroidery sewing.
Why does the bobbin thread keep breaking on my Janome Sewing Machine?
The bobbin thread may break because: * The bobbin thread is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and doesn’t turn smoothly. Replace the bobbin.
What to do if my Janome Sewing Machine does not run?
If your Janome Sewing Machine isn't running, check the following: * Ensure the machine is plugged in. * Check for thread caught in the hook race. * If the control circuit isn't working correctly, turn the switch off and on again. * Note that the Start/Stop button is not for ordinary sewing when a foot control is plugged in.
Why does the needle thread keep breaking on my Janome MEMORY CRAFT 9500 Sewing Machine?
The needle thread may break for several reasons: * The needle thread might not be threaded properly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be inserted incorrectly. * The thread might be too heavy for the needle. * The needle thread might not be set in the thread holder when embroidery sewing started.
What to do if PC Card does not work in my Janome MEMORY CRAFT 9500?
General| Type | Computerized Sewing and Embroidery Machine |
|---|---|
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| Display | LCD Touchscreen |
| USB Connectivity | Yes |
| Automatic Needle Threader | Yes |
| Drop Feed | Yes |
| Bobbin Type | Horizontal Rotary |
| Maximum Sewing Speed | 820 stitches per minute |
To Next Page
