Janome MEMORY CRAFT 9700 - Replacing the Light Bulb

JanomeFlyer.com
102
1
2
Replacing the Light Bulb
WARNING:
Turn the power off before replacing the light bulb.
The bulb could be HOT, wait until it has cooled down
before touching it.
To remove:
Open the faceplate. Pull out the bulb from the lamp
socket.
1 Lamp Socket
2 Light bulb
To replace:
Insert the bulb into the opening of the socket.
Close the face plate.
Janome MC9700 Sewing Machine Instruciton Manual
www.janomeflyer.com
Memory Craft 9700 Owners Manual/ User Guide