EMBROIDERY MODE
Embroidery Hoops
Embroidery Hoop A:
This is the standard size hoop, with a 12.6 cm (5”) by
11 cm (4 3/8”) embroidery area for sewing PC Card
embroidery designs etc.
1 Outer Hoop
2 Inner Hoop
3 Attaching Knob
4 Hoop Tightening Screw
Template for Embroidery Hoop (A)
5 Starting Point for Monogram in Vertical
Orientation
6 Indicates the embroidery boundary for
built-in designs, PC Design Card Nos. 1001
and up.
7 Indicates the embroidery boundary for
Memory Card No. 102 and up.
8 Starting Point for Built-in designs and
monograms
9 Starting Point for the designs from
Memory Card Nos. 102 and up
10 Starting Point for Monogramming in
Horizontal orientation.
Embroidery Hoop B:
This is the large-size hoop, with a 20 cm (8”) by 14 cm
(5 1/2”) embroidery area for sewing large-size designs
and combined designs.
1 Outer Hoop
2 Inner Hoop
3 Attaching Knob
4 Hoop Tightening Screw
Template for Embroidery Hoop (B)
5 Starting Point for Built-in designs and
monograms
6 Indentations for Positioning the Template
NOTE:
The four indentations on the template do not
correspond with reference lines.
STARTING POINT FOR MEMORY CARDS ( FROM No.1001 )
STARTING POINT FOR MEMORY CARDS ( FROM No.102 )
STARTING POINT
1
2
3
4
8
10
9
5
1
3
2
4
6
5
6
7
75
To Next Page
Loading...
