39
To Sew
Fold back the left seam allowance. Turn under the right
seam allowance to form a 0.2 to 0.3 cm (1/8") Fold.
Place the zipper teeth next to the fold and pin it in
place.
1 Lower Fabric
2 End of the Zipper Opening
3 Zipper Teeth
4 0.2 to 0.3 cm (1/8”)
5 Wrong Side of the Upper Fabric
6 Opening Size
7 Fold
8 Basting Line
Set the stitch length back to “2.2” and thread tension
to AUTO.
Attach Zipper Foot E with the Pin on the Right-hand
Side.
Sew through the fold and zipper tape guiding the
zipper teeth along the edge of the foot.
Stop just before the foot reaches the slider on the
zipper tape. Lower the needle slightly into the fabric.
Raise the foot and open the zipper. Lower the foot and
stitch the remainder of the seam.
9 Slider
10 5 cm (2”)
1
2
3
4
5
6
7
3
8
3
5
4
10
9
5
3
4
5
To Next Page
Loading...
