45
Press the Start/Stop Button to sew the buttonhole.
The buttonhole will be automatically sewn in a single
step.
The front bartack and left row first, then the right row
and back bartack. The machine will stop automatically
when the buttonhole is completed.
When buttonhole sewing is finished, push the
buttonhole lever up as far as it will go.
Remove the fabric and place a pin just below the
bartack at each end to prevent accidentally cutting
threads.
Cut the opening with the Seam Ripper. Use an Eyelet
Puncher to open a keyhole buttonhole.
1 Seam Ripper
2 Eyelet Puncher
1
2
Completed
Raise Presser Foot.
5
5
6
6
7
7
To Next Page
Loading...
