30
n The buttonhole is sewn in the sequence as shown.
automatically with the needle in the up position.
Double layer buttonhole
To make a sturdy buttonhole, sew another layer of
buttonhole stitches over the previous stitches.
buttonhole lever, simply start the machine again.
n
m
,
m Remove the fabric and place a pin just below the
bartack to prevent accidentally cutting the stitches.
Cut the opening with the seam ripper.
Pin
Seam ripper
,
buttonhole lever upward as far as it will go.
y Buttonhole lever
y
NOTE:
If the fabric is not feeding smoothly when sewing
a double layer buttonhole, increase the buttonhole
density (refer to page 31).
!4
!3
!3
!4
To Next Page
Loading...
