Janome MyLock 644D - DECORATIVE OVEREDGING; Thread and Fabric Selection; Machine Setup for Overedging; GATHERING

82
For Better Results
Rolled hemming
Pull the end of thread chain to the back lightly in the
beginning and end of sewing.
Fabric
Thread chain
Picot edging
Pull the fabric lightly to the back while sewing.
Fabric
For narrow hemming
Correct tension
The illustration at left shows sewing results with
correct tension settings.
Wrong side of fabric
Right side of fabric
Right needle thread
Upper looper thread
Lower looper thread
* Refer to page 66 for the adjustment.