Janome MyLock 744 - Table of Contents

TO CHANGE THE FACE PLATE UNIT....................................................................................................... 1
TO CHANGE THE BELT COVER ............................................................................................................... 2
TO CHANGE THE TOP COVER UNIT ....................................................................................................... 3
TO CHANGE THE FRONT COVER UNIT ..................................................................................................4
TO CHANGE THE FREE ARM COVER UNIT ............................................................................................ 5
TO CHANGE THE MACHINE BASE .......................................................................................................... 6
TO CHANGE THE MACHINE SOCKET ..................................................................................................... 7
TO ADJUST THE NEEDLE HEIGHT .......................................................................................................... 8
TO ADJUST THE PRESSER BAR HEIGHT ............................................................................................... 9
TO ADJUST THE FEED DOG HEIGHT ..................................................................................................... 10
TO ADJUST THE TIMING OF THE NEEDLE AND THE FEED DOG.........................................................11
TO ADJUST THE TIMING OF THE NEEDLE AND THE UPPER KNIFE................................................... 12
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLES AND
THE LOWER LOOPER/NEEDLE GUARDS ......................................................................................... 13-15
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLES AND
THE FIXED NEEDLE GUARD ................................................................................................................... 16
TO ADJUST THE POSITION OF THE CHAINING FINGER...................................................................... 17
TO ADJUST THE POSITION OF THE UPPER LOOPER ......................................................................... 18
TO ADJUST THE TIMING OF THE NEEDLE AND THE LOWER LOOPER ............................................ 19
TO ADJUST THE TIMING OF THE UPPER AND LOWER LOOPERS ..................................................... 20
TO ADJUST THE CLEARANCE BETWEEN THE LOOPERS ................................................................... 21
TO ADJUST THE CLEARANCE BETWEEN THE NEEDLE AND THE UPPER LOOPER ....................... 22
TO ADJUST THE POSITION OF THE KNlVES........................................................................................ 23
TO ADJUST THE POSITION OF THE LOOPER THREAD GUlDE ........................................................... 24
TO ADJUST THE STITCH LENGTH.......................................................................................................... 25
TO ADJUST THE THREAD TENSION DIALS ........................................................................................... 26
TABLE OF CONTENTS