Jasco V-530 User Manual

ii
(2) Warning Label
Warning labels are attached at several locations on this instrument. Do not remove,
deface or damage the warning labels. If a warning label peels off the instrument or
becomes illegible, contact your local JASCO distributor and state the part number of
the label you want to replace.
1) Warning for FUSE
(Fig.1 or Fig. 2)
Part No.: 0822-0120A
2) Warning for GROUND
(Fig.1 or Fig.2)
Part No.: 0822-0125A
Warning for FUSE Warning for GROUND
Figure 1 Warning Labels on the V-530 Back Panel
!
WARNING
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE, REPLACE
ONLY WITH FUSE OF THE SPECIFIED
TYPE AND CURRENT RATINGS.
Only use fuses of the specified rating to protect
both operator and instrument from fire and other
hazards. When replacing a fuse, refer to the
hardware manual (4.4.1 Replacing the fuse). The
warning labels that pertain to fuse ratings are
located on the back panel of the instrument.
!
WARNING
MAINS PLUG GROUND PIN
OR GROUND TERMINAL
MUST BE CONNECTED
TO GROUND.
This instrument must be grounded correctly;
either the mains plug ground pin or through the
ground terminal on the rear panel of the
instrument.

Jasco V-530 Specifications

General

Brand	Jasco
Model	V-530
Category	Measuring Instruments
Language	English