EasyManua.ls Logo

Jasic LS-15000F - Page 18

Jasic LS-15000F
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
3.1.3 Settings interface
Figure 3-3 Setting interface of welding mode
This interface requires manual input of the password: 123456
1) Laser power is the maximum power of the laser used.
2) The gas switch-on/off delay time is 200ms by default, and the range is 0ms -3000ms.
3) When turning on the light, the light-on power gradually rises from N1% of technological power to the
technological power; when turning off the light, the light-off power gradually reduces from the
technological power to N2% of technological power.
As shown in the figure below:

Related product manuals