Electric shock——May cause serious injury or even death!
·Install grounding devices according to application standards.
·Do not touch any live parts with your exposed skin, wet gloves, or wet clothes.
·Be sure to be insulated from the ground and the workpiece.
·Ensure that the workstation is safe.
Fumes and gases——May be hazardous to your health.
·Locate the equipment in a well-ventilated position and keep your head out of
the fume. Do not breathe the fume.
·When welding, use ventilation or extraction devices to maintain a
well-ventilated working environment.
Laser radiation and arc rays——May injure the eyes and burn the skin.
·Wear approved safety glasses in 1080nm band under your helmet.
·Protect bystanders from hazards with suitable masks or shading curtains.
·As the laser is reflected by the mirror, ensure that no personnel without
protective equipment stands in the reflection area.
Improper use and operation may lead to fire or explosion
·Welding sparks may cause a fire. Please confirm that there are no flammable
materials near the welding station and pay attention to safety and fire
prevention.
·The fire extinguishing devices shall be ensured to be equipped nearby and the
trained personnel proficient in using them shall be available.
·Do not weld closed containers.
·It is prohibited to use the machine for pipeline thawing.
·The output laser intensity of hand-held laser welder is enough to ignite
inflammable and explosive articles, such as gasoline, gas, alcohol, etc. Make
sure there are no inflammable and explosive articles around welding.
Hot workpieces can cause serious burns
·Do not touch hot workpieces with bare hands.
·There should be a cooling time when using the welding torch continuously.
Noise--Excessive noise can cause damage to people's hearing.
·Protect your ears by wearing ear shields or other hearing protectors.
·Warn bystanders that the noise can potentially harm their hearing.
To Next Page
Loading...
