Magnetic field affects cardiac pacemaker
·Before consulting a doctor, pacemaker users should stay away from the
welding site.
Moving parts may cause personal injury
· Keep away from moving parts such as fans.
·Various protective devices such as doors, panels, covers, and baffles, etc.
should be tightly closed and put in place.
Fault--When encountering difficulties, seek professional help.
·For difficulties during installation and operation, please follow the relevant
content of this manual for troubleshooting.
·If you still cannot fully understand the content contained in the manual after
reading, or cannot solve the problem as per the instructions in this manual,
immediately contact your supplier or the service center of JASIC to seek
professional assistance.
2. Product overview
The handheld laser welder is to achieve the purpose of welding by controlling the high energy laser beam
to fuse the welding base material and the welding wire. Compared with traditional arc welding, laser
welding enjoys such advantages as more delicate, more stable, lower heat input, more beautiful weld
formation, few consumables, simpler operation and higher efficiency, which can meet the welding needs
of various industries.
Performance features:
All-in-one design, flexible and convenient. The compact all-in-one design covers a small area and is
equipped with moving pulleys, which can be adjusted at any time according to the site requirements,
making it convenient and flexible to use.
In addition to the beautiful weld formation, and the heat input can be precisely controlled by finely
adjusting the laser swing width, laser power, swing frequency, etc. to meet the welding strength,
reduce the deformation of the workpiece, and achieve the optimal welding results.
Reduce labor cost and material cost. The operation is less difficult, making it easy to get started; the
welding speed is fast, enjoying high efficiency; the weld seam is beautiful, eliminating the need for
later grinding; and the consumables are reduced.
The human-machine interface is simple and easy to operate.
To Next Page
Loading...
