Jasic MIG250P - 6.1. Front Panel Structure and Components

10
6. PANEL STRUCTURE AND DESCRIPTION
6.1. Panel structure and
description
Picture 1 Front panel
No.
Component
name
Component function
1
Segment display
Display welding current and
welding function
2
Adjusting knob
Welding function selection
and welding parameters
setting
3
Gas check
button
Welder gas check
4
Welding mode
button
MMA, TIG, MIG and pulse
MIG selection
5
Welding material
button
Carbon steel/stainless steel/
aluminum-silicon/
aluminum-magnesium
selection
6
Euro output
connector
Euro torch connector for
MIG
7
Polarity adapter
Euro output socket for
polarity selection
8
Segment display
Display welding voltage and
welding parameters setting
9
Adjusting knob
Setting for welding
parameters and board
thickness
10
Synergic button
Synergic/separated
selection
11
Welding function
button
Parameters setting for
pre-flow, post-flow, striking
arc, stopping arc, upslope
and downslope
12
Welding method
button
Spot/2T/4T selection
13
Wire diameter
button
Wire diameter selection
14
Welder output
socket
“+ ”output
15
Welder output
socket
“-”output